GP:50 MELT PRESSURE TRANSDUCERS/TRANSMITTERS
 
For additional information on Melt Pressure Transducers, please contact ISI toll free at (800) 468-4969 or use our handy contact page
Copyright © 2017 by Instrumentors Supply, Inc.  ·  All Rights reserved  ·  E-Mail: isisales@instrumentors.com

GPR700/770 1/4 DIN MELT PRESSURE INDICATOR/CONTROLLER

The GRR700 is a fully programmable indicator with a single input configured for melt pressure measurement and the choice of wiring either strain gauge or amplified transducers to the unit. An optional second input provides an additional facility for differential pressure measurement if required. The update time for each channel is 50ms to respond to very fast processes. To provide full process measurement, the second input can be configured for either thermocouple or RTD temperature measurement. Three pre-configured and ready to use alarms are associated to the process to detect high and low pressure conditions. A flexible alarm strategy enables shutdown of the extruder at danger-ous pressure levels.

FEATURES

* Universal + strain gauge inputs. 
* Three fast-acting alarms to protect against over-pressure. 
* High visibility three color LED display. 
* High reliability and quality 
* Three year warranty 
* Optional secondary input for differential pressure/temperature display or control 
* Analogue retransmission 
* Easy, effective auto-tune 
* Easy and flexible configuration via PC software or front panel
Specifications
DIGITAL PRESSURE/TEMPERATURE PROCESS INDICATOR MODEL 1254

FEATURES

* 5Digit LED Red or Green Display
* Main input: 350
Ώstrain gauge, linear DC voltage and DC current. Second input optional.
* RS485 Modbus Serial communications protocol
* 3 Digital Inputs
* 2 or 4 Alarms with ISA
A Acknowledge
* Analogue Retransmission, optional DC current
* Different kinds of visualizations
* Peak/Valley Functions
* 3 Password levels of Parameter Protection



Specifications
EXTRUSION MELT PRESSURE GAUGES MODEL A30, A31


FEATURES

* No Electrical Power required
* All Stainless Steel Construction
* Large 4” Display can be rotated 300° for easy reading
* Totally Maintenance free
* Full Two
Year Manufacturer's warranty
Specifications
RUPTURE DISKS (BLOWOUT PLUGS) / MELT PLUGS (SOLID PLUGS) MODEL RDEB AND MP30

FEATURES

* Assembly consists of a threaded tubular body with a rupture disk soldered onto the process end
* One piece construction
* 300 series SS body material, other materials available
* Burst Rating 750 to 15, 000 PSIG
* Burst Tolerance: ±10%


MELT PRESSURE ACCESSORIES Maintenance Accessories for the prolonged life of GP:50 Transducers and Transmitters.
IMH Series Pressure Transmitter, Model M,V, and C

APPLICATIONS

* Injection Molding
* Hydraulic
* Pneumatic

FEATURES


* Choice of Electrical Outputs
* Available Electrical Connections: 6-Pin, Hirschman, and Leads
* Small Size (1.5" OD x 3.5" Long)
* Available Options for All Melt Applications

PRESSURE RANGES

From 0-100 PSIG Through 0-15,000 PSIG

ISI is proud to offer GP:50 melt pressure transducers, transmitters, melt temperature sensors, and instrumentation.  GP:50 Products are synonymous with high quality construction, superior accuracy, and advanced design. They offer a 3-year warranty and are manufactured in the U.S.A.